Toxicity of the mosquito control insecticide phenothrin to three life stages of the grass shrimp (Palaemonetes pugio)

Phenothrin is a synthetic pyrethroid used as a contact insecticide in mosquito control programs. This study compared the toxicity of phenothrin to adult, larval and embryonic grass shrimp (Palaemonetes pugio) and examined oxidative stress responses in adult and larval grass shrimp. The adult 24-h LC50 was 0.341 μg/L (95 % confidence intervals 0.282–0.412) and the 96-h LC50 was 0.161 μg/L (95 % CI 0.128–0.203 μg/L). The larval 24-h LC50 was 0.50 μg/L (95 % CI 0.441–0.568) and the 96-h LC50 was 0.154 μg/L (95 % CI 0.139–0.170 μg/L). In the presence of sediment, the 24-h LC50 was 6.30 μg/L (95 % CI 5.00–7.44 μg/L) for adults and 0.771 μg/L (95 % CI 0.630–0.944) for larvae. The sublethal biomarkers glutathione and lipid peroxidase (LPx) were examined after 96-h phenothrin exposure at five concentrations, and there were no statistically significant differences in these levels in adults or larvae compared to controls. There was a significant downward trend in larval LPx levels. This research confirms that phenothrin is highly toxic to grass shrimp and suggests that both adult and larval grass shrimp are appropriate life stages for risk assessments.     

Differential enhanced degradation of cis‐ and trans‐1,3‐D in soil with a history of repeated field applications of 1,3‐D

Abstract

The fumigant 1,3‐dichloropropene (1,3‐D) is considered to be a potential alternative to methyl bromide. The degradation rates of cis‐ and trans‐l,3‐D in soil from a treated site during three successive annual applications of 1,3‐D progressively increased with an increase in the number of annual applications. The enhancement was greater for trans‐l,3‐D degradation than cis‐l,3‐D. In untreated soil, the degradation rates of the two isomers were similar. The enhancement lasted slightly longer than 2 years after annual field application of 1,3‐D had ceased. A single field reapplication of 1,3‐D to the treated site that had not been treated for 2 years resulted in resumed differential enhanced degradation of cis‐ and trans‐l,3‐D. Microorganisms were responsible for the enhanced degradation.     

Incorporating differences between genetic diversity of trees and herbaceous plants in conservation strategies

Reviews that summarize the genetic diversity of plant species in relation to their life history and ecological traits show that forest trees have more genetic diversity at population and species levels than annuals or herbaceous perennials. In addition, among-population genetic differentiation is significantly lower in trees than in most herbaceous perennials and annuals. Possible reasons for these differences between trees and herbaceous perennials and annuals have not been discussed critically. Several traits, such as high rates of outcrossing, long-distance pollen and seed dispersal, large effective population sizes (N_e), arborescent stature, low population density, longevity, overlapping generations, and occurrence in late successional communities, may make trees less sensitive to genetic bottlenecks and more resistant to habitat fragmentation or climate change. We recommend that guidelines for genetic conservation strategies be designed differently for tree species versus other types of plant species. Because most tree species fit an LH scenario (low [L] genetic differentiation and high [H] genetic diversity), tree seeds could be sourced from a few populations distributed across the species’ range. For the in situ conservation of trees, translocation is a viable option to increase N_e. In contrast, rare herbaceous understory species are frequently HL (high differentiation and low diversity) species. Under the HL scenario, seeds should be taken from many populations with high genetic diversity. In situ conservation efforts for herbaceous plants should focus on protecting habitats because the typically small populations of these species are vulnerable to the loss of genetic diversity. The robust allozyme genetic diversity databases could be used to develop conservation strategies for species lacking genetic information. As a case study of reforestation with several tree species in denuded areas on the Korean Peninsula, we recommend the selection of local genotypes as suitable sources to prevent adverse effects and to insure the successful restoration in the long term.     

Processes in informal end-processing of e-waste generated from personal computers in Vietnam

Informal treatment of e-waste plays an important role in many countries which have no or weak formal waste management structures. One of the challenges for assessing informal e-waste recycling technologies is to identify their disadvantages and potential technology improvement. The analysis of informal recycling processes starts with a balance of input and output materials for each of the processes. Main obstacles are the fact that in most cases, mixed or variety materials serve as input and, secondly by nature, the informal sector does not systematically measure and monitor the process. This study presents the processes and available data for informal e-waste recycling of desktop personal computer as it consists of components made of plastic and many metals within the Vietnamese context. To identify the most relevant processes, critical flows and technology gap, two scenarios are compared: (1) current situation in which recycling activities are taken in recycling craft villages and (2) appropriately selected BAT. The selected materials from e-waste cover a wide range of recycling processes and technologies: Printed Circuit Board treatment, metal (ferrous metal, aluminum and copper) and plastic recycling.

     

Operational Characteristics of Effective Removal of H2S and NH3 Waste Gases by Activated Carbon Biofilter

Abstract

Simultaneous removal of hydrogen sulfide (H₂S) and am- gases. monia (NH₃) gases from gaseous streams was studied in a biofilter packed with granule activated carbon. Extensive studies, including the effects of carbon (C) source on the growth of inoculated microorganisms and gas removal efficiency, product analysis, bioaerosol emission, pressure drop, and cost evaluation, were conducted. The results indicated that molasses was a potential C source for inoculated cell growth that resulted in removal efficiencies of 99.5% for H₂S and 99.2% for NH₃. Microbial community observation by scanning electron microscopy indicated that granule activated carbon was an excellent support for microorganism attachment for long-term waste gas treatment. No disintegration or breakdown of biofilm was found when the system was operated for 140 days. The low bioaerosol concentration emitted from the biofilter showed that the system effectively avoided the environmental risk of bioaerosol emission. Also, the system is suitable to apply in the field because of its low pressure drop and treatment cost. Because NH₃ gas was mainly converted to organic nitrogen, and H₂S gas was converted to elemental sulfur, no acidification or alkalinity phenomena were found because of the metabolite products. Thus, the results of this study demonstrate that the biofilter is a feasible bioreactor in the removal of waste gases.     

Characterisation of particulate matter on the receptor level in a city environment

Airborne particulate matter (PM) has become one of the dominant pollutants with the increasing material and energy demand due to global economic growth. The main objective of this research is to provide a comprehensive receptor level characterisation of the particulate matter collected in a city environment. Particulate matter samples were collected on Tapered Element Oscillating Microbalance (TEOM) filters from five monitoring sites over a period of 1 year. An Andersen eight-stage cascade impactor was also used to collect airborne PM samples from three other locations to compare with the samples collected by TEOM. All the samples were then subjected to individual particle morphology and chemical composition analysis by SEM/EDS. Bulk chemical composition of the samples were also analysed through ICP–OES. Based on these analyses, possible sources of the PM samples were identified. The results showed that the monitoring sites in residential environments were dominated by transportation-derived particles and other migratory particulates. Monitoring sites near the city centre were dominant by particles from transportation, with biological particles abundant for the site closer to a river. The monitoring station located close to the industrial area, despite only 200 m away from a motorway, has low contribution of non-exhaust particulates from vehicles. Instead, the particulates collected from this site were dominated by industrial sources. An air dispersion modelling package was also used to model the particulate matter dispersion in the city area for the period of sampling. The results from the model showed that the points of high emissions were around industrial areas.     

Using plastic bag waste to assess the reliability of self-reported waste disposal data

Direct waste analysis (DWA) and the material flows approach are the two standard methods to quantify aggregated waste streams and analyze waste composition. Yet, with the increasing application of producer responsibility measures, product-based waste data rather than aggregated waste data are becoming important. It is over this requirement that both approaches fail to some extent in delivering the type and quality of information that is needed. This study uses plastic bag waste as an illustration to show how self-reported questionnaire survey data may be used to assess disposal quantities of product-based waste types. The estimates from a large-scale questionnaire survey with over 4,100 completed cases were verified against DWA data of the same year in Hong Kong. It was found that self-reported data give systematically lower figures (on the order of 1.3-5 times) than those obtained from standard methods such as DWA for Hong Kong and the UK. However, it is demonstrated that self-reported data can be internally consistent. Also, the magnitude of underestimation may not be as considerable as it appears since the data from DWA are not themselves entirely accurate owing to the difficulties in obtaining a pure load of waste for field analysis and the variable moisture contents or contamination levels in waste material.     

Nitrification/denitrification in an intermittent aeration process for swine wastewater

Abstract

Nitrogen removal by a methane fermentation plus activated sludge process with the intermittent aeration was presented based upon a full‐scale pig farm experiment. Swine wastewater had a T‐N/BOD ratio from 0.2–0.29. The BOD concentration input to the process ranged from 1050–1608 mg l^‐1 and the T‐N concentration from 273–350 mg l^‐1. More than 90% of organic carbon was removed in each experimental run. Only small concentrations of NO₃‐N were found in the effluent and higher than 60% of the T‐N and 73% of NH₄‐N which were loaded to the intermittent aeration tank was removed. The nitrogen balance of each run was calculated. Denitrification was estimated to be accountable for 45–90% of the T‐N removed in the intermittent aeration tank. Denitrification rate increased as the BOD concentration increased (> 1300 mg l^‐1). The T‐N removal percentage was a function of the T‐N/BOD ratio of the influent. Although higher DO concentration (> 3 mg l^‐1) did not enhance the denitrification rate, nitrification did maintain at relative higher rates at a lower DO concentration (ave. 1.5 mg l^‐1). An operational condition of intermittent interval of aeration/nonaeration at 1:1 hr is better than that of the condition at 3:1 hr. As a result, T‐N and NH4‐N were removed up to 30% and 40% respectively, and the denitrification rate reached 79% in the intermittent aeration tank. An experimental run in a pilot plant on treating anaerobically pretreated swine wastewater was observed to verify simultaneous nitrification/denitrification. The results of the full‐scale plant experimentation seem to be confirmed by those obtained from the pilot plant runs.     

Assessment of the school drinking water supply and the water quality in Pingtung County, Taiwan

In this study, a questionnaire survey of school drinking water quality of 42 schools in Pingtung County was conducted according to the water sources, treatment facilities, location of school as well as different grade levels. Among them, 45% of schools used tap water as the main source of drinking water, and the schools using groundwater and surface water as drinking water source account for 29% and 26%, respectively. The schools above senior high school level in the city used tap water as drinking water more than underground water, while the schools under junior high school level in the rural area used surface water as their main source of drinking water. The surface water was normally boiled before being provided to their students. The reverse osmosis system is a commonly used water treatment equipment for those schools using tap water or underground water. Drinking fountain or boiled water unit is widely installed in schools above senior high school level. For schools under junior high school level, a pipeline is stretched across the campus. Relative test shows that the unqualified rate of microbe in water is 26.2%. All parameters for physical and chemical properties and metal content had met the domestic standards except that the turbidity of schools under junior high school level using tap water is slightly higher than the standard value.